#AK1T - 6-Bolt Flange Complete Accessory Valve Kit 1.5" with Tassilini Sample Valve. (Includes VF1, BV3, SV1T)
This accessory kit is designed for all New Generation ECO & Dexter Flextank models produced since 2012. It includes a complete drain valve installation with the 6 Hole Flange valve kit, & Tassilini sample...
#AK2T - 6-Bolt Flange Accessory Valve Kit 2" with Tassilini Sample Valve (Includes VF2, BV4, SV1T)
This accessory kit is designed for all New Generation ECO & Dexter Flextank models produced since 2012. It includes a 2" complete drain valve installation with the 6 Hole Flange valve kit, &...
#ALS1 - Apollo Lift Strap and Spreader Bar Assembly
The ALS1 is a simple but elegant solution for lifting Flextank "Apollo" fermentor and tipping pomace into a bin or press basket.
It consists of a heavy duty galvanized steel channel spreader bar that fits atop forklift...
#ALS2 - Apollo Lift Strap (strap only)
Apollo Lift Strap Only
May be purchased as a kit and in Cat. No. ALS1
#FL2 - Fermentation Lock.2 (for use on New Generation Dexter Lids)
The fermentation lock is a one way pressure release valve that opens at approximately 0.1 PSI pressure. It screws into the 2 in. threaded fitting included in the lids of our Dexter Series.2 (new generation) style lids...
#LB - Pair of Lifting Brackets for Apollo Tank
Pair of Lifting Brackets for Apollo Tank (includes 8 blots and washers)
These are a very heavy item and will have extra charges for UPS shipping to be advised. Best bet is to have these ship inside your apollo egg...
#P37 - 37" Pallet for Apollo Tanks and Cylindrical 200 & 300 tanks
37 X 37 X 6" Pallet Accessory item for Apollo Tanks and Cylindrical Tanks:
This product is only avaialbe for LTL Shipping with your tanks, not via UPS...
#RP1VF - Racking Port Valve Kit 1.5 in. w/ 6 Hole Flange Fitting
Racking Port Kit- Includes: 1.5" SS Round Flange 6-Bolt Fitting, 3 x 1.5" Tri-Clamps, 3 x 1.5" Tri-Clamp EPDM Gaskets, 1x 1.5" Butterfly Valve, and 1 x Racking Elbow, 1 x 1.5" Tri-Clamp Blank
#RP2VF - Racking Port Valve Kit 2.0 in. w/ 6 Hole Valve Flange Fitting
Racking Port Kit- 2" SS Round Flange 6-Bolt Fitting, 1- 2" Tri-Clamp and Teflon Gasket, 1-1.5" Racking Elbow, 1-1.5" Butterfly Valve, 2-1.5" Tri-Clamps, 2-1.5" Tri-Clamp EPDM Gaskets and 1-1.5" Tri-Clamp Blank Cap...
#SV1T -Tassilini Sample Valve
Conventional Sampling Tap Screws directly into threaded inserts included in all our tanks. Inserts accept the SV1T or the SV3 style sample valves. Also, includes a hex wrench for plug removal and an extra gasket to allow for...
#T1 - Thermometer
Manage your ferment temperature with our new Italian Engineered metric thermometer; threads into any Flextank at the 18mm sample valve port.
#TW1 - Thermowell
18mm Hex Drive Thermowell, screws into sample valve port. In 304 SS comes complete with EPDM gasket and set screw for probe.
#VF1 - Valve Flange Kit 1.5 in.
Drain valves are always positioned in the same place on a given tank and molded-in threaded inserts provide secure attachment points for a Flextank designed valve flange. These stainless steel flanges are made in high volume...
#VF2 - Valve Flange Kit 2.0 in.
#VK3 - Valve Kit 1.5 in.
A combination of the valve flange and butterly valve kits. Includes all parts required to attach a drain valve to any of our and current tanks. Includes: and 1.5" 6-Bolt SS Flange Fitting, 2-1.5" Tri-Clamps, 2-1.5"...
#VK4 - Valve Kit 2.0 in.
A combination of the valve flange and butterfly valve kits. Includes all parts required to attach a drain valve to any of our tanks. and Includes: 2" 6-Bolt SS and Flange Fitting, Gasket, 2-2" Tri-Clamps, 2-2" Tri-Clamp...
Cooling Plate Lid, with Grommets
Cooling Plate Lid Assembly, Original Dexter Lid with 2 each Grommets installed and Drum Plug 2'' NPT.
FT-10337-Original Dexter Lid , 2007 - 2010 aka Cooling Plate Lid aka flat lid
These units are predrilled for the...
Egg. 1 Ton Flextank Apollo Egg Fermentor
*Illustration may show accessories that are available at extra cost.* Principally designed as a small batch closed fermentor the APOLLO tank may also be used for long term storage. As a and fermentor the Apollo offers...
French Medium Toast (Designed to use with our 240 & 300 Stacker Tanks, Apollo, and 570 tanks)
Species: French Oak, Available As: Single Sleeved Stave, Multiple Stave 5- PackToast Levels: Medium
Dim's: 5 ea 1/2" x 3" x...
French Medium Toast, Barrel Mill Spirals- (4) 27' segments in mesh and plastic bag (Designed to use with our 240 & 300 Tanks, Apollo, and 570 tanks)
Species: French Oak, Available As: Single Sleeved Stave, Multiple Stave 4- PackToast Levels: Medium
Dim's: 5 ea 1/2" x 3" x...
All prices are in USD. © 2018 Tanks For Wine | Sitemap
Powered by BigCommerce