#ALS1 - Apollo Lift Strap and Spreader Bar Assembly $265.00
The ALS1 is a simple but elegant solution for lifting Flextank "Apollo" fermentor and tipping pomace into a bin or press basket. It consists of a heavy duty galvanized steel channel spreader bar that fits atop forklift...
#ALS2 - Apollo Lift Strap (strap only) $135.00
Apollo Lift Strap Only May be purchased as a kit and in Cat. No. ALS1
#BH1 - Bulkhead Fitting 1.5 in. $69.00
Flextank designed bulkhead fitting allows a Tri-Clover butterfly valve to be positioned anywhere on our tanks. and These fittings are most often used for attaching racking valves. They are rugged high quality fittings...
#BH1W - BH1 Accessory Wrench $16.00
Large closed-end accessory wrench for assembling BH1's.
#BH2 - Bulkhead Fitting 2.0 in. $139.00
Flextank designed bulkhead fitting allows a Tri-Clover and butterfly valve and to be positioned anywhere on our tanks. and These fittings are most often used for attaching racking valves. They are rugged high quality...
#DLA - Dexter Lid Assembly (Dexter Lid, Gasket, Bung Gasket, and Clampo Clamp) $80.00
New Dexter Lid, Gasket, and Clamp set for upgrading previous Dexter Lid Systems *Please note, Lids "do not" qualify for the flat rate parts shipping of $13.95...
#DLA2 - Dexter Lid Assembly (Dexter Lid, Gasket, Bung Gasket, and Clampo Clamp) $82.00
#FL1 - Fermentation Lock.1 (for use on all Eco tanks and Dexter Lids before May 31, 2014) $27.00
The fermentation lock is a one way pressure release valve that opens at approximately .49 PSI pressure. It screws into the 2 in. threaded fitting included in the lids of both our ECO and Dexter Series.1 style lids...
#FL2 - Fermentation Lock.2 (for use on New Generation Dexter Lids) $27.00
The fermentation lock is a one way pressure release valve that opens at approximately 0.1 PSI pressure. It screws into the 2 in. threaded fitting included in the lids of our Dexter Series.2 (new generation) style lids...
#LB - Pair of Lifting Brackets for Apollo Tank
Pair of Lifting Brackets for Apollo Tank (includes 8 blots and washers) These are a very heavy item and will have extra charges for UPS shipping to be advised. Best bet is to have these ship inside your apollo egg...
#P37 - 37" Pallet for Apollo Tanks and Cylindrical 200 & 300 tanks
37 X 37 X 6" Pallet Accessory item for Apollo Tanks and Cylindrical Tanks: EM200 EH200 DM200 DH200 EM300 EH300 DM300 DH300 AH230 This product is only avaialbe for LTL Shipping with your tanks, not via UPS...
#P48 - 48" Racking Pallet for 30, 50, 70 , 80 & 500 Gal Tanks
48 X 48 X 5.88" Racking Pallet. Use for storage of: EM30 DM50 DH50 EM70 EH70 DM80 EH80 DH500 This product is only avaialbe for LTL Shipping with your tanks, not via UPS...
#PL1 - Pallet and Lug for Warehouse Racking
The two-way entry reinforced pallet is designed to support a load of up to 3300 lb. when straddling support beams 42 in. apart in a standard warehouse setting, similar to the systems widely used in "big box" stores. A and...
#RE1 - Racking Elbow 1 in. $65.00
The racking (rotating) elbow fits through a 1.5 inch tri-clamp bulkhead fitting. and It may be installed and either before the tank is filled with a valve clamped to the elbow or after the tank has been drained down to the...
#RE2 - Racking Elbow 1.5 in. $75.00
The racking (rotating) elbow fits through a and 2 inch tri-clamp bulkhead fitting. It may be installed either before the tank is filled with a valve clamped to the elbow or after the tank has been drained down to the level...
#S15 - Floating Skin for 30 Gal Flextank $49.00
The New, Lighter Weight Flextank Floating “skins” are made to fit the cross section of a particular tank. They are floated on top of the wine to reduce absorption of oxygen from the tank headspace when the tank...
#S19 - Floating Skin for 50 Gal Flextank $64.00
#S23 - Floating Skin for 80 Gal Flextank $79.00
#S33.5 - Floating Skin for 200 & 300 Gal Vertical Flextank $99.00
#SV1T -Tassilini Sample Valve $65.00
Conventional Sampling Tap Screws directly into threaded inserts included in all our tanks. Inserts accept the SV1T or the SV3 style sample valves. Also, includes a hex wrench for plug removal and an extra gasket to allow for...
Loading... Please wait... 